OBD/SS Elite

$1,000.00

Plug‑and‑Play Suspension Bypass for 2021–2024 GM SUVs

The OBD/SS Elite is a simple module that plugs into the OBD‑II port and a CAN tap under the passenger seat on your 2021–2024 GM SUV. It lets you remove all MagneRide and Adaptive Air shocks (Air Spring RPO F47 and MagneRide RPO Z95) and even other air suspension parts like lines, tanks, manifolds, and the control module without getting any dash warnings or speed limits. The factory MagneRide controller stays powered, so you won’t see “Service Suspension” or “Service Leveling” messages, check engine lights, or an 80 mph limp mode. Each kit includes the OBD/SS Elite module, a CAN1 data harness, and a mountable pass‑through OBD cable. It’s a fast, reliable way to replace the whole suspension system and keep your dash happy.

RPO Support List:

Z95 paird with F47 Only

Full-System Bypass, Plug & Play

Cleanly removes both Magneride (Z95) and Adaptive Air Suspension (F47) systems. No reprogramming required.

No Warning Lights or Limp Mode

Eliminates all dash messages including Service Suspension, Service Leveling, and Headlamp errors. No 80mph speed limiter.

Keeps SCM Active, Removes Everything Else

The Elite bypass allows full removal of air lines, accumulator tank, air manifold, and ASCM, while leaving the Suspension Control Module (SCM) properly connected and active.

Built for 2021–2024 Full-Size GM SUVs

Fits Escalade, Tahoe, Suburban, and Yukon/YukonXL with Z95 and/or F47.

Assembled & Supported in the USA

Made in-house with U.S. support, pre-tested for performance, and includes everything needed for a clean install.

Why Upgrade from Magneride + Air Suspension?

Whether for lift kits, performance upgrades, or peace of mind, this module lets you delete complex factory suspension systems while keeping your dash error-free.

Comprehensive Bypass. Clean Dash.

The OBD/SS Elite is more than a shock bypass. It disables suspension faults, headlamp messages, and limp mode, even when air system components are fully removed.

OEM-Fit, Smart Install

Designed with OEM-style connectors and mounting. Installs cleanly using the OBD-II port and 8-pin CAN tap located under the front passenger seat. No guesswork or wiring mess.

Optional Accessories

Install Guides

Quick Start Guide

Step 1:
Vehicle Ignition OFF and Battery Disconnected
Step 2:
Remove two fuses from the under hood fuse box located on the passenger side of the engine in front of the battery.
1. F61 (ALC MAIN 15A)
2. F68 (ALC MTR 40A)
Step 3:
Route the 2 pin CANBUS Tap Harness from under the front passenger seat, through the center console, to the OBD port.
Step 4:
Plug the CANBUS Tap Harness into the 8 Pin - module located under the front passenger side seat in plain view.
Step 5:
Connect OBD/SS Elite to the OBD Port
Step 6:
Connect the CANBUS Tap Harness to the OBD/SS Elite
Step 7:
Reconnect the Battery